top of page
  • A technology specially adapted to podiatry.

FOOTWORK néo

®

THE IDEAL PODOMETER TO START YOUR STATIC, POSTURO AND DYNAMIC ANALYZES

  • 2,704 capacitive sensors

  • Ideal for mobile use

  • Active dimension of 40 x 40 cm

  • Only 2.3 Kg and 4 mm thick

  • An exceptional quality / price ratio

  • Offered with its FOOTWORK EDITION software (INITIAL formula)

In addition to this, you need to know more about it.

THE ESSENTIAL

The static / posturo reference

FOOTWORK Neo, AMCUBE

2704

capacitive sensors

3 year warranty

podometre garanti 3 ans

Zero recalib.

FOOTWORK professional pedometer connected for Podiatrist and  Podiatry practice

FOOTBALLWORK neo

in all its forms

LIGHT, ROBUST AND RELIABLE. A REFERENCE FOR ALMOST 20 YEARS

With its active area of 40 cm x 40 cm, its light weight and its robustness, FOOTWORK is the ideal electronic pedometer for a first acquisition or for mobile use.

FootWork allows a detailed static and posturographic analysis as well as most of the dynamics with the acquisition of a right step and a left step. High quality graphics allow data to be used very quickly with simultaneous display of 2 feet and multiple analyzes with comparison. The FOOTWORK software makes it possible to objectify and enhance your clinical examination and highlight the Gait Line, the maximum and average pressures and the duration of the presses

STATIC, STABILO and 3D

A restitution to patients combining static analysis, stabilometric analysis and 3D representation.

EASY TO INSTALL

Connect your pedometer to your computer using a simple USB cable.

NO RECALIBRATION

Thanks to its capacitive sensors, FOOTLYSER S does not require any recalibration

EASY TO CARRY

Ideal dimensions, only 2.3 Kg and a handle for easy transport.

PERFECT DIMENSION

A perfect dimension that takes into account the space required for an analysis and the floor space available in the office

RELIABLE and ROBUST

Robust materials and continuous R&D that guarantee extreme use (up to 250 kg load)

LIGHTWEIGHT, ROBUST AND RELIABLE

A REFERENCE FOR 20 YEARS

With its active area of 40 cm x 40 cm, its light weight and its robustness, FOOTWORK is the ideal electronic pedometer for a first acquisition or for mobile use. Made in France, it has top-of-the-range and robust materials which give it unparalleled durability. With FOOTWORK, you are guaranteed to have a pedometer that will not require any recalibration and that has a 3-year warranty.

STATIC, STABILO, 3D and ELEMENTARY DYNAMICS

A restitution to patients combining static, stabilometric analysis, 3D and dynamic representation over 2 steps.

EASY TO INSTALL

Connect your pedometer to your computer using a simple USB cable.

NO RECALIBRATION

Thanks to its capacitive sensors, FOOTWORK does not require any recalibration

EASY TO CARRY

Ideal dimensions, only 2.3 Kg and a handle for easy transport.

PERFECT DIMENSION

Perfect dimension that combines ideal active surface and small footprint to optimize the space available in the practice

RELIABLE and ROBUST

Robust materials and continuous R&D that guarantee extreme use (up to 250 kg load)

A WIDE CHOICE OF DESIGN

... to choose according to your desires

Pedometer with new electronics, 3 colors to choose from:

Coupled with powerful software dedicated to  STATIC AND DYNAMIC ANALYSIS OF THE FOOT"

Precise, reliable and ergonomic, the FOOTWORK EDITION software is the benchmark for podometry analysis software. For 25 years, it has continued to evolve thanks to feedback from experienced podiatrists and suggestions from international podiatry researchers.

The FootWork Edition software (with its INITIAL formula) allows a detailed static and posturological analysis as well as most of the dynamics with the acquisition of a right step and a left step. The software facilitates the comparison of 2 analyzes. It allows you to objectify and enhance your clinical examination and highlights the Gait Line, the maximum and average pressures and the duration of the supports. To communicate with your patient or the medical presciptor, generate comprehensive, customizable reports that can be printed or emailed directly from the software.

STATIC ANALYSIS

  • Pressure centers and maximum pressure for each foot

  • Front and rear R / L distribution and by zone

  • Projection of the center of gravity

  • Study area

  • Static video

  • Stabilometry: ellipses and dimensions of pressure centers.

  • Oscillation and% in surface and in time: frontal and sagittal plane.

DYNAMIC ANALYSIS

  • Display of the Gait Line and the maximum pressure line

  • Average and maximum pressures of left and right pitch

  • Support duration and integral pressure / time.

  • Video of the progress of the step with simultaneous display of the force, surface and pressure curves.

Coupled with a powerful software dedicated to STATIC AND DYNAMIC ANALYSIS OF THE FOOT "

ACCESSORY

... but essential

Store your platform safely and in "style"

Slide your platform onto its raised pedestal (simplifies the maintenance of your floor)

Save space in your practice and limit the risk of accident

In addition to this, you need to know more about it.

Enjoy a clean and timeless design that showcases your pedometer

AMCUBE DESIGN display designed to accommodate your electronic pedometer. Easy to assemble and disassemble. Transparent plexiglass material.

AdobeStock_278782232.jpeg

Technical characteristics

  • Active area: 400 x 400 mm

  • Overall dimension: 565 x 440 mm

  • Thickness: 4.5mm

  • Weight: 2.5 kg

  • Pressure range: 10 kPa - 1200 kPa

  • Calibration: 100% digital

  • Cover and frame: Polycarbonate

  • Power supply: via USB cable

  • Editing: Several formats (MS Word, Adobe PDF, CSV) including actual size (1: 1)

What configuration for my computer?

Recommended hardware: PC with Windows 7 minimum, 1 dedicated USB port, i5 processor, 8 GB of RAM

bottom of page